Sealants and Adhesives
Neutral Cure Silicone Sealant
- Sold by
- Case of 20, or single sausage
- Volume
- 20 fl oz (590 ml) per sausage
- Packaging
- Foil sausage, needs a sausage gun
- Movement
- Grade 50
- Service temp
- −58°F to 302°F
Neutral Cure Silicone Sealant
One-component neutral cure silicone for weatherproofing curtain wall and sealing construction joints. It cures by reacting with moisture in the air to form a flexible elastomer. Neutral cure means non-corrosive: it will not attack coated aluminum, galvanized metal, or masonry the way an acetoxy sealant can.
How it is sold
- Sold by: A case of 20 sausages, or a single sausage
- Minimum order: One sausage
- Volume per sausage: 20 fl oz (590 ml)
- Packaging: Collapsible aluminum foil sausage, crimped both ends. It needs a sausage gun, not a cartridge gun. The gun is not included.
- Volume price: From 20 cases the price per sausage drops to $5.00 and local New York City delivery is included.
Coverage
Theoretical yield from one 20 fl oz sausage, no allowance for waste, tooling loss, or joint irregularity. Order about 10% over.
| Joint width x depth | Linear feet per sausage |
|---|---|
| 1/4 x 1/2 in | 24 ft |
| 3/8 x 1/2 in | 16 ft |
| 1/2 x 1/2 in | 12 ft |
| 3/4 x 1/2 in | 8 ft |
| 1 x 1/2 in | 6 ft |
Specifications
- Type: One-component neutral cure silicone, moisture curing
- Consistency: Smooth uniform paste, non-sag, suitable for vertical and overhead joints
- Movement capability: Grade 50 per the supplied technical data sheet
- Service temperature: −58 F to 302 F (−50 C to 150 C)
- Application temperature: 39 F to 104 F (4 C to 40 C)
- Tack-free time: 0.7 hours
- Hardness: Shore A 47
- Shelf life: 12 months in unopened original packaging
- Storage: Cool and dry, below 80 F, out of sunlight
Limitations
Not for load-bearing structural glazing, continuous water immersion, fully enclosed joints, surfaces releasing oil or plasticizer or solvent, PE, PP or PTFE without validated treatment, bituminous materials without confirmed compatibility, or food contact and potable water without approval. Adhesion must be tested on the actual project materials before construction. Laboratory testing was carried out to GB 16776-2005 and GB/T 13477; this is not ASTM certification and not US code approval.
California Proposition 65
WARNING: This product may contain chemicals known to the State of California to cause cancer or reproductive harm. For more information go to www.P65Warnings.ca.gov.
